Rife Machine Grounding Plate

TrueRife has shortened many programs to compensate for this increased energy flow which allowes users to spend less time in sessions. Energy output has been calibrated on the F-117 / F-110 and T-150 to allow for grounding devices to be used safely when used as instructed.

Those who experience strong herx effects from such use may have to either suspend using grounding, shorten programs, or allow more recovery time after sessions.

The top layer of the Matrix foot plate is not metal but a silver oxide coated polymer and therefore eliminates unsafe issues that can be experienced when using other manufacturers metal foot plates.

High Energy Grounding control (see: http://truerife.com/truerifedevices.html) and the NEW Matrix foot plate have been developed to eliminate safety issues that can arise from grounding high energy Rife devices.

History and principles of Matrix foot plate development

We have had many request for a foot plate to use as a grounding device with the TrueRife F-117, F-110 or T-150 bulb output. Up till the present, we had never developed such a device because of inherent voltage issues that can result when used in conjunction with a high energy plasma system.

R.G.E. (*Reflective Grounding Effects) was developed while working with G.E. (General Electric) Polymershapes in researching the possibilities of using a special polymer that would have similar characteristics as glass being placed over a conductor which produces an energy flow due to capacitance when exposed to electrical fields. Several samples of various material were researched and the end result is a breakthrough that generates Reflective Grounding Effects.

Energy is not only accelerated while the feet rest on the mirrored surface top panel, but a reflection of energy also takes place generating an additional energy field of resonant frequency transmission along with bulb output resulting in incredible effects! The Matrix Foot Plate is used in place of the grounding tube or other grounding devices.

THE MATRIX

There are actually four layers or a matrix of material with two internal conductor plates used for the foot plate. The top plate is a classified mirror silver oxide polymer, as is the triple layered material that we are using for the two conductor plates.

All four layers total just 1/4 inch! The top plate acts as the energy collector when in contact with the bottom of the feet. This plate also limits current flow to a comfortable level to avoid electrical shock. The energy accelerator plate is the second layer and is grounded. A polymer non-conductor separates the grounded accelerator plate from the reflector which radiates signal back up into the user.

The LED ground module mounted on the mirrored surface will actually glow red even without contact with the foot plate because of the radiant energy being reflected by the bottom plated to ground while the plasma system is running nearby. As your feet get closer to the plate, the LED will begin to glow brighter. Once in contact with the plate, you can hear and feel the plasma energy field accelerate. The LED on the ground control module will now glow brightly!

Because of the polymer composition, this grounding device effectively removes the possibility of electrical burns or arcing that can occur with metalic foot plates.

The end result is an accelerated energy field that amplifies the resonant field effects of the F-117, F-110 or T-150 plasma output!